Inconel Product Dealers `Stainless Steel Alloys
ASTM B167 UNS N06696 Inconel Suppliers, Inconel Material Price
In heat treatment applications, Inconel is famous for handling extreme temperatures without losing its strength. It can hold moderate loads even when very hot, which makes it better than many stainless steel grades for these tasks. Unlike stainless steel, a basket made from Inconel will not easily lose its shape when subjected to high heat during manufacturing processes.
Inconel alloys can also handle rapid temperature changes, from very cold to very hot, without losing their oxidation resistance. This means a single Inconel basket can be used in processes with varying temperatures.
Inconel Material Composition
Inconel Material Specification
Solid solution strengthened.
Acid resistant, good weldability. The LCF version is typically used in bellows. Ideal for hardware and components in the power, aerospace and chemical processing industries. Offered in sheet, plate, bar and forgings.
Gamma double prime strengthened with good weldability. The preferred material for cryogenic storage tanks, turbines, downhole shafts and wellhead parts offered in sheet, plate and bar.
Commonly used for gas turbine components, including blades, seals and rotors.
- Inconel 907
- Inconel 909
- Inconel 706
- Inconel 617
- Inconel 751
Increased aluminium content for improved rupture strength in the 1600 °F range.
- Inconel 792
Increased aluminium content for improved high temperature corrosion properties, used especially in gas turbines.
- Inconel 939
Gamma prime strengthened to increase weldability.
- Inconel 188
Readily fabricated for commercial gas turbine and aerospace applications. Offered in sheet, plate and bar.
- Inconel 690
Low cobalt content for nuclear applications, and low resistivity.
- Inconel 713C
Precipitation hardenable nickel-chromium base cast alloy.
- Inconel 230
Inconel 230 Plate & Sheet mainly used by the power, aerospace, chemical processing and industrial heating industries, Aerospace Materials.
Inconel density & Inconel Properties
Inconel Tensile Strength
| Physical Properties | Metric | English | |
|---|---|---|---|
| Inconel Alloy 600 | Density | 8.47 g/cc | 0.306 lb/in³ |
| Inconel Alloy 625 | Density | 8.44 g/cc | 0.305 lb/in³ |
| Inconel Alloy 718 | Density | 8.19 | 0.296 lb/in3 (8.192 g/cm3) |
Inconel Alloy 625 Density*. 8440 [kg · m-3]
Inconel Alloy 625 Density: 0.303 lb/in3 (8.44 g/cm3)
Inconel Electrical Conductivity
| Material | Conductivity | Resistivity | |
|---|---|---|---|
| (% IACS) | (Siemens/m) | (Ohm-m) | |
| Inconel 600 | 1.70 | 9.860E+05 | 1.014E-06 |
| Inconel 600 | 1.67 | 1.030E-06 | |
| Inconel 601 | 1.45 | 1.190E-06 | |
| Inconel 617 | 1.41 | 1.220E-06 | |
| Inconel 625 | 1.34 | 1.290E-06 | |
| Inconel 690 | 11.65 | 1.480E-07 | |
| Inconel 718 | 1.38 | 1.250E-06 | |
| Inconel X750 | 1.41 | 1.220E-06 | |
Notes: conductivity converted from resistivity
Inconel Hardness
Inconel Rockwell Hardness, Inconel Strength
| Material | Conductivity |
| Inconel Alloy 625 Bar | ≤ 287 HB |
| Inconel Alloy 625 Sheet | 145-240 |
| Inconel Alloy 625 Tube | |
| Seamless and Welded | – |
| Inconel Alloy 600 rod and bar | 65-85B |
| Inconel Alloy 600 Plate | 65-85B |
| Inconel Alloy 600 Sheet | 88B max |
| Inconel Alloy 600 Tube and Pipe | 88B max |
| Inconel Alloy 600 Wire | – |
| Inconel Alloy 600 Wire | – |
| Inconel Alloy 600 Wire | – |
Inconel suppliers, Inconel Products Stockist
Inconel Pipe
Inconel Tube
Inconel Tubing
Inconel Heat Treatment
| Heat Treatment Inconel Alloy 600 | Inconel Alloy 600 is not an age hardening alloy; cold working is the only available means of hardening. Softening by annealing begins at about 1600°F (871°C), and is reasonably complete after 10 to 15 minutes of heating at 1800°F (982°C). Above this temperature, grain growth may be objectionable, although very brief heating at 1900°F will cause complete softening without undue grain growth. Since the rate of cooling has no effect on the softening, the material may be water quenched or air cooled. |
|---|---|
| Heat Treatment Inconel Alloy 625 | Inconel Alloy 625 has three basic heat treatments: (1) High Solution Anneal – 2000/2200°F (1093/1204°C), air quench or faster. (2) Low Solution Anneal – 1700/1900°F (927/1038°C), air quench or faster. (3) Stress Relieve – 1650°F (899°C), air quench. |
| Inconel Heat Shield | Inconel (2200 deg F continuous). |
Inconel Low Temperature
| Inconel Alloy 718 | temperature ranges from cryogenic up to 1400°F |
| Inconel Alloy 625 | temperatures ranging from cryogenic to 2000°F |
Inconel Melting Point
| Inconel Alloy 718 Melting Range | Solution Treated: 2500-2600°F Solution Treated and Aged: 1370-1430°C |
| Inconel Alloy 600 Melting Range | Metric: 1354 – 1413 °C English: 2470 – 2580 °F |
| Inconel Alloy 625 Melting Range | 2350 – 2460°F (1280 – 1350°C) |
Inconel Thermal Conductivity
Inconel Thermal Properties, Inconel Thermal Expansion
| Inconel Alloy 600 Thermal Conductivity | Metric: 14.9 W/m-K English: 103 BTU-in/hr-ft²-°F |
| Inconel Alloy 625 Thermal Conductivity | Metric: 9.8 W/m-K English: 68 BTU-in/hr-ft²-°F |
Inconel Temperature Limits
| Inconel Alloy 600 Heat Capacity | Metric: 0.444 J/g-°C English: 0.106 BTU/lb-°F |
| Inconel Alloy 625 Heat Capacity | Metric: 0.41 J/g-°C English: 0.098 BTU/lb-°F |
Inconel Mechanical Properties
Typical Mechanical Properties
| Material | Form and Condition | Tensile Strength | Yield | Elongationgation % | Hardness, Rockwell | ||
|---|---|---|---|---|---|---|---|
| Inconel Alloy 600 rod and bar | Cold drawn Annealed | 80-100 | 550-690 | 25-50 | 170-345 | 55-35 | 65-85B |
| Inconel Alloy 600 Plate | Hot rolled Annealed | 80-100 | 550-725 | 30-50 | 205-345 | 55-35 | 65-85B |
| Inconel Alloy 600 Sheet | Cold Rolled Annealed | 80-100 | 550-690 | 30-45 | 205-310 | 55-35 | 88B max |
| Inconel Alloy 600 Tube and Pipe | Cold Drawn Annealed | 80-100 | 550-690 | 25-50 | 170-345 | 55-35 | 88B max |
| Inconel Alloy 600 Wire | Cold Drawn Annealed | 80-120 | 550-830 | 35-75 | 240-520 | 45-20 | – |
| Inconel Alloy 600 Wire | Cold Drawn No 1 Temper | 105-135 | 725-930 | 70-105 | 480-725 | 35-15 | – |
| Inconel Alloy 600 Wire | Spring Temper | 170-220 | 1170-1520 | 150-210 | 1035-1450 | 5-2 | – |
| Inconel Alloy 625 Bar | Annealed | 120 | 827 | 60 | 414 | 30 | ≤ 287 HB |
| Inconel Alloy 625 Sheet | Annealed | 120 | 827 | 60 | 414 | 30 | 145-240 |
| Inconel Alloy 625 Tube Seamless and Welded |
Annealed | 120 | 827 | 60 | 414 | 35 | – |
Inconel Uses and Applications
Inconel Alloys are resistance to extreme temperatures and its ability to retain enough strength at high temperatures, it is the ideal basket material for heat treat applications.
- Jet Engines
- Marine applications
- Aerospace industries
- Sea-water applications etc.
Inconel Ultrasonic Velocity
Inconel Ultrasonic Testing
| Material | in/sec | m/sec |
|---|---|---|
| INCONEL | 224400 | 5699.76 |
FAQ: Inconel is Ferrous Or Nonferrous metal
Best Answer : Inconel is Non ferrous because it consists mostly of Nickel with only a small amount of Iron in its chemistry.
| ITEM | BRAND | SIZE |
|---|---|---|
| Inconel alloy | Inconel 600 Inconel 601 Inconel 625 Inconel 718 |
Plate:3.0~60.0mm (THK) *1000mm (WIDTH) *2000mm (LENGTH) Bar:Round:Φ5.5~250mm;Square:40~240mm*40~240mm Wire:Φ0.1mm~18mm Strip:0.1~3.0mm(THK)*≤ 420mm (WIDTH) Seamless pipe:6mm~219mm(OD)*0.5mm~18mm(WT) Welded tube:1mm~120mm(OD)*0.1mm~10mm(WT) U Shape pipe: 10mm~40mm (OD)*0.5-5mm (WT) Flange: 3/8” ~48” (DN10 ~DN1200) Tee: 1/2”~48”* SCH 5-SCH160/XXS(WT) |
| Monel alloy | Monel 400 Monel K500 |
|
| Nickel 52 | ||
| Nickel alloy | Nickel 200 | |
| Nickel 201 | ||
| Hastelloy C276 | ||
| Hastelloy alloy | Hastelloy C22 | |
| Hastelloy B2 | ||
| Hastelloy X | ||
| Invar alloy | Invar 36 | |
| Kovar alloy | Kovar 29 | |
| Incoloy 800 | ||
| Incoloy 800H | ||
| Incoloy alloy | Incoloy 800HT | |
| Incoloy 825 |